Previous
Next
Product Description
TECNOBOOST 4 is an intelligent water pump assembled with high efficiency permanent magnet motor and variable frequency converter in one smart compact design to provide constant pressure boosting for domestic, residential and light commercial water applications.
Series Design
TECNOBOOST is a horizontal, multistage centrifugal pressure boosting pumps.
Applications
TECNOBOOST 4 is an ideal solution for boosting water pressure in:
- Single family house, apartments, villas, townhomes.
- Small residential buildings (with max. 3 floors & 8 outlets)
- Light commercial applications.
It is designed to increase water pressure from roof tank, break tank, ground tank, city mains, and shallow wells.
Key Features
- Intelligent operation, variable speed control.
- Smart compact design makes installation possible in tight spaces.
- Low-noise operation.
- Air-cooled permanent magnet motor.
- Self-priming up to 8 m.
- Energy saving thanks to integrated inverter technology.
- Built-in pressure tank reduces the number of starts & stops.
- High quality components.
- Multiple protection including dry-run protection.
- Plug and play, quick to install.
- Easy to use LED display control panel with push buttons.
Material of Construction
- Pump body: Stainless Steel
- Impeller: PPO
- Shaft: Stainless Steel
- Mechanical seal: Carbon/Ceramic
Operating Data
- Max. Flow: 5 [m³/h]
- Max. Head: 48 [m]
- Rated Flow: 3 [m³/h]
- Rated Head: 24 [m]
- Max. Suction Head: 8 [m]
Electrical Data
- Rated Voltage: 1 x 220~240 [V]
- Frequency: 50 – 60 [Hz]
- Rated Input Power: 550 [W]
- Rated Current: 4.9 [A]
- Protection class: IPX6
- Power cable length 1.5 m
- Plug Type: by Country
Technical Data
- Pump type: Centrifugal, Multistage Pump
- Pumped fluid: Clean Water (non-aggressive, free of solids)
- Pump control: Variable Speed
- Maximum suction lift: 4 m
- Min / Max. ambient temperature: 4 °C / 55 °C
- Max fluid temperature: 75 °C
- Inlet / Outlet Diameter: G 1″ (Female)
- Installation: Horizontal Installation
Motor Data
- Motor type: Permanent Magnet Motor
- Max speed: 5200 [rpm]
- Winding: Copper
- Motor duty: S1 (Continuous Operation)
- Motor cooling: Air-cooled
- Insulation class: F
Performance Curve
Dimensional Drawings
| Product Model | Nominal Diameter | Length | Width | Height | Net Weight | |||
| Inlet [mm] | Outlet [mm] | L [mm] | W [mm] | W1 [mm] | H [mm] | H1 [mm] | [Kg] | |
| TECNOBOOST 4 | 25 | 25 | 390 | 194 | 142 | 290 | 140 | 8.5 |
Exploded View
| Part No. | Description | Part No. | Description |
| 1 | Drain plug | 33 | Motor heatsink shell |
| 2 | Sealing gasket | 34 | Clamp |
| 3 | Screw | 35 | Suppot |
| 4 | Gasket | 36 | Screw |
| 5 | Pump body | 37 | Motor heatsink shell |
| 6 | Screw | 38 | Shell (upper) |
| 7 | Check valve spring | 39 | Screw |
| 8 | Check valve | 40 | Gasket |
| 9 | Sealing gasket | 41 | Protecting bush |
| 10 | Diffuser | 42 | Cover box (lower) |
| 11 | Nut | 43 | Cover box (upper) |
| 12 | Impeller | 44 | Screw |
| 13 | Baffle | 45 | Sealing gasket |
| 14 | Studdle | 46 | Screw |
| 15 | Gasket | 47 | Line seal gasket |
| 16 | Mechanical seal | 48 | Screw |
| 17 | Sealing gasket | 49 | PCB circuit board |
| 18 | Baffle | 50 | Sealing gasket |
| 19 | Water deflector | 51 | Tank |
| 20 | Screw | 52 | Sealing gasket |
| 21 | Suppot | 53 | Pressure sensor |
| 22 | Bearing | 54 | Support |
| 23 | Rotor | 55 | Dust cover |
| 24 | Bearing | 56 | Circlip |
| 25 | Wave spring | 57 | Check valve (inlet/outlet) |
| 26 | Motor stator shell | 58 | Temperature sensor |
| 27 | Winding | 59 | Sealing gasket |
| 28 | Fan | 60 | Five-way |
| 29 | Fan cover | 61 | Sealing gasket |
| 30 | Screw | 62 | Sealing gasket |
| 31 | Plastic base | 63 | Check valve base |
| 32 | Shell (lower) |
- Product Model: TECNOBOOST 4
- Net Weight: 8.5 [Kg]
- Gross Weight 10 [Kg]
- Product Dimensions: 390 x 194 x 290 [mm]
- Packaging Dimensions 430 x 235 x 335 [mm]